|Relation Type:||Married Woman 4 Married Man|
|Seeking:||I Look Sexual Encounters|
Sherry and Stingray MP Meter My Hay won 11th in the Long round, making it back to the short round; then the pair took 4th in the short round and moved up to 8th in the average.
Keep up the good work. The great Steer Wrestling team split 3rd at the Reno Rodeo! Bryce also ended up 2nd in the tie down roping. For his efforts, Bryce took home the All Around title for the season! Bryce won 1st in the first round, and 5th in the second and third round of the CNFR in the team roping, and is going into the short round in the lead of the average. Heart is a daughter of Dinero, and out of a Driftwood and War Deck bred mare.
We wish Bryce continued luck, and are pulling for him! This is a Colt Lqdy that was meticulously prepared by our client and coated in a non-durable finish.
The finish turned very dirty and began slipping after approximately rounds. This weapon will be disassembled, degreased and blasted to remove both the custom finish and the original finish. Photos 1,2 and 3 The Colt AR disassembled and blasted removing all finishes. The next step for this weapon is Parkerizing. This weapon is suppressed and generates a lot of heat! The finish is more subdued than is shown here due to the camera flash and a light coat of gun oil.
Photo 1 Here is the Winchester 94 degreased and blasted clean. X-Bar disassembled Prepped for parkerizing and DuraCoat base pjoto2 Watch this site tomorrow for the custom finish. Note the speckling Wuoming ties all the colors together. This piece has a Matte Clear finish as a final top coat. The flash on the camera makes the finish appear to have a sheen.
It is very flat. Advanced Armaments 7. Here is the suppressor after removing the original finish. The suppressor has recieved a new coat of DuraHeat in Wildlife Tan. The suppressor below sits on the end of the barrel of this one.
This piece will be finished in some light camo colors. These two containers of upper parts have already been disassembled and cleaned. The next steps Wyomiing blasting, parkerizing and applying the finish. Shown below are the reassembled uppers. Glock Model 19 Duracoated in Pink Lady. It has been DuraCoated in a custom mix that closely approximates the original bluing.
These shotguns were manufactured by High Standard and are excellent phoro2 the field on dove and quail! Marlin From top to bottom. The finish was rough. The next two photos show disassembly and blasting. The final two photos show the Marlin finished in Titanium DuraCoat inside and out. All the screws he and slots have been dressed to like new condition.
A final application of DuraCoat Satin Clear was applied to seal the surface. Winchester Model 12 disassembled and blasted.
The reciever is deeply pitted from rust. Keep watching this one! Aside from the piece of lint I left on the reciever, it has been returned to a Caspre and serviceable weapon.
The DuraCoat finish applied is a custom color that closely matches the original bluing in both color and sheen. Browning A5 16 ga. The barrel is badly pitted.
The reciever is pitted on the lower section just above the trigger group. Here are two photos of the Browning A5 16 ga. It is once again sharp and ready for the field.
There was minimal loss of the scroll work due to rust and pitting. The barrel and chamber has been polished removing any s of rust LeFever 12 ga Double Barrel. The finish is gone from the metal with some rust pitting on the barrels. More to come on this piece.
Here is the completed LeFever 12 ga Double Barrel. It was manufactured in Ithaca, NY.
This old war horse is ready for the field, again Steyer Casoer with original black painted finish. The owner wanted a DuraCoat Gloss Black finish that would protect the piece under all conditions.
Photo 1 Surface prepared by blasting Photo Photo 4 The Steyer AK reassembled. Photo 5 This Colt A1 arrived at the shop in very poor condition. The only bluing was a bit left on the magazine. We thought it was going to be a lost cause, but, we put our hearts into saving the piece. Turns out the Colt was a "war gun" having been built in We are proud to have saved a piece of U. Military history. There is a "P" stamped on top Caspre the slide and a very faint Ordinance stamp on the right side of the frame just in front of the trigger phkto2 pin.
This was a great project!
The Colt is proudly displaying its newly applied Parkerized finish. Photo 3 We recieved several photos from Sgt. The following is his note. Thank you, Sgt.
Sexy Single Wants Horny Dating Fuck Friends Buddie Or Walking Buddie
Lonely Searching Discreet Bbw Woman That Like Cum In Their Pussy
Sex Swingers Want Sex Ads
Lonly Wife Wants Uk Free Dating Site Bbw Girl Searching Adults Looking For Sex
Beautiful Woman Looking Seek Sex Looking For A Lady Friend With Benefits